Arietta KIT01938 Instruction Manual download pdf (Page 2)

WARNING:

• Read and Save These Instructions.

• Approved for Residential Appliances only.

• PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.

• INSTALLER: Please leave these Instructions with this unit for the owner.

• OWNER: Please retain these instructions for future reference.

• Turn off power circuit at service panel and lock out panel before installing this kit to the appliance.

• Installation must comply with all local codes.

PACKAGING CONTENTS

• Air deflector

• Charcoal Filter

• 2 Assembly screws

• 4 Springs

INSTALLATION INSTRUCTIONS

1) After the duct cover bracket has been installed on the ceiling (Refer to Installation Instructions in the Hood

Manual)

, assemble the air deflector to the duct cover bracket with 2 assembly screws, as is shown in the

following image.

Duct cover bracket

ir deflector

2) Measure from the bottom of the air deflector to the bottom of the hood outlet, as is shown in the following image.

Cut the ductwork at the measured dimension.

1 2 3 4 5

No comments

Arietta KIT01938 Instruction Manual Page 2