Installation Instructions
INSTALLATION INSTRUCTIONS
Airow
Ductwork
Hood
Duct tape
over seams
3
Uninstall the air deector removing the 4 assembly screws.
Slip the duct onto the bottom of the deector.
Place the assembled deector and duct work over the exhaust outlet from the hood.
Assemble the air deector to the duct cover bracket, with the 4 assembly screws provided.
Use duct tape to seal the deector and the exhaust outlet from the hood, as is shown in the
following image. The duct tape must be approved for this application
3
5
4
6
7
CHARCOAL FILTER INSTALLATION
Remove the grease lter of the hood.
Position the charcoal lter inside the structure of the motor as shown in picture b.
Reinstall the grease lter onto the bottom of the hood.
Comments to this Manuals