Arietta KIT0102876 Installation Guide download pdf (Page 2)

WARNING:

Read and Save These Instructions.

Approved for Residential Appliances only.

PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.

INSTALLER: Please leave these Instructions with this unit for the owner.

OWNER: Please retain these instructions for future reference.

Turn o power circuit at service panel and lock out panel before installing this kit to the appliance.

Installation must comply with all local codes.

Installation Instructions

PACKAGING CONTENTS

Air deector

Charcoal Filter

4 Assembly screws

INSTALLATION INSTRUCTIONS

After the duct cover bracket has been installed on the wall (Refer to Installation Instructions

in the Hood Manual), assemble the air deector to the duct cover bracket with 4 assembly

screws, as is shown in image 1.

Measure from the bottom of the air deector to the bottom of the hood outlet, as is shown

in image 2. Cut the ductwork at the measured dimension.

1 2 3 4 5 6 7 8

No comments

Arietta KIT0102876 Installation Guide Page 2