Arietta Dekor Glass 30 Instruction Manual download pdf (Page 26)

Use And Care Instructions

Charcoal filter saturation alarm (Recirculating accessories)

• After one hundred and twenty functional hours of the fan, the display will show “Charcoal Filter” if the fan

is active. When this icon flashes on display, the charcoal filters installed are required to be replaced or

reactivated.

• To reset the grease filter saturation indication the user must press the “-” key for 5 seconds, after this

time the icon “charcoal filter” is not display and the hood has the normal display operation.

Audible signal activation and deactivation

• The audible signals can be activated or deactivated pressing the “Light” key for 5 seconds.

• If the audible signal is activated, a tone must sound and the “Snd” symbol must appear on the display

for 2 second.

• If the audible signal is deactivated, the “Snd” symbol must appear on the display for 2 second and no

sound must sound.

Charcoal filter inclusion and exclusion (Recirculating accessories)

• The charcoal filter inclusion or exclusion can be set by pressing the “-” and “+” keys at the same time for

5 seconds.

• The Inclusion or exclusion of charcoal filter must be selected while the lamps and the motor are OFF.

• When the charcoal has been excluded, the charcoal filter alarm is disabled.

Heat sensor

• The control is equipped with a heat sensor that will turn on the blower at second speed if excessive heat

occurs (over 70°C) surrounding the control area.

• If the blower is OFF or if it is operating at first speed, the blower will be set automatically to second

speed.

• During this state, the user may raise the blower speed to third speed but can not decrease the speed.

• When the temperature level on the hood drops to normal, the blower will operate in the setting defined

by the user before the alarm occured.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 63 64

No comments

Arietta Dekor Glass 30 Instruction Manual Page 26