12
Install framing for hood support
Warning: This installation instruction is not prepared for
horizontaldischarge
• If drywall is present, mark the screw hole locations.
Refertoductworkinstallationguidelines.
• Cutawayenoughdrywalltoexpose2verticalstudsat
the holes location indicated by the template.
Install three horizontal supports at least 4" X 2"
between three wall studs at the bottom mounting holes
installation location.
• The horizontalsupport must be ushwith the room
side of the studs.
Use cleats behind both sides of the support to secure
to wall studs.
• Reinstalldrywallandrenish.
IMPORTANT
Framing must be capable of supporting 323 lbs.
Installation Instructions
8-1/2“ min. opening for ductwork
4“x 2“ Min. Mounting Support
Top screw location
Square slot
Bottom fixing screw location
Top outlet
Knockouts (junction box)
Side slot (4)
Rear outlet
Comments to this Manuals