Arietta CHN001MX36 Instruction Manual download pdf (Page 12)

Installation Instructions

• Mark screw holes locations in the wall.

IMPORTANT. Check to be sure that holes locations are leveled, and correctly centered by the vertical

centerline. (This installation instruction applies for concrete wall)

Drill 5/16" pilot holes in the marked locations.

Install wall fastener anchors.

Drivewoodscrews,byhand,intothefastenerstoallowanchorstoexpand.Removescrews.

Secure the bracket to the wall with wood screws and/or fasteners.

Mounting the duct cover bracket

Option A - Fixed height duct cover

• Fromthehorizontallinetracedintheprevioussection,traceahorizontalparallellineasshownbelow.

• Centerthebracketinthetophorizontallineandalignitwiththecenterline,asdescribedinthefollowing

drawing.

28 - 8/16”

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 52 53

No comments

Arietta CHN001MX36 Instruction Manual Page 12