12
Replacing the halogen lamp (ARG628SS models)
CAUTION: Before replacing the lamps, disconnect power off
to prevent from being switched on accidentally.
Turn off the range hood and allow the halogen / incandescent
lamp to cool. To avoid damage or decreasing the life of the new
bulb,donottouchbulbwithbarengers.Replacebulb,usingtis-
sue or wearing cotton gloves to handle bulb.
If new lamps do not operate, make sure the lamps are inserted
correctly before calling service.
1. Disconnect power.
2. Push up on the lens and turn it counterclockwise.
3. Removethebulbandreplaceitwitha120-volt,50-watt
maximum halogen bulb with a GU10 base. Turn it clockwise
to lock it into place.
4. Repeatsteps2-3fortheotherbulbifneeded.
5. Reconnect power.
Replacing the incandescent lamps (AAR428SS models)
1. Use a Phillips # 2 screw driver to remove the lamp cover.
Remove it carefully from its housing.
2. Removethedamagedlampbulb(turncounterclockwise)and
replace it with a new bulb. E12 Philips Lamp 120V, 40W.
Reconnect power.
Available Accessories
Recirculating Kit
If it is not possible to vent cooking fumes and vapors to the
outside,therangehoodcanbeusedinthenon-vented
(recirculating)version,usingacharcoalfilter.RecirculationKit
model number KIT07770 is available from The Home Depot
as a separate purchase..
E
A
B
G
D
F
H
I
A
B
G
F
C
D
E
A. Ceiling
B. Vent cover
C. Soffit
D.6”(15.2cm)vent
E. Range hood
F. Cabinet
G.Wall
H.12”(30.5cm)min.cabinetheight
I.17”(43.2cm)min.ventcoverheight
NOTE:12”(30.5cm)highcabinetswithoutasoftmayallowthe
6” vent and vent cover to be seen.
Thecharcoallterscannotbecleaned.Theymustbereplaced.
Cover the grill that protects the suction motor with the carbon
ltersothattheslotsontheltercorrespondtothepinson
the sides of the motor protection grill.
Turnthecarbonlterclockwisetoblockthem(bayonetxing).
Thecharcoalltersshouldbereplacedevery4-6months
(dependingonhoodusage).
NOTE:DONOTrinse,orputcharcoalltersinanautomatic
dishwasher.
Extension Liner Kit
•
30” wide x 17” or 20” deep liner is available for both AAR428SS
and AGR628SS which provides complete protection of
the cabinets (modelnumberKIT02773).
•
36” wide x 17” or 20” deep liner is available for both AAR428SS
and AGR628SS which provides complete protection of
the cabinets(modelnumberKIT02774).
See Liner installation instructions for more detail.
Comments to this Manuals